manualshive.com logo in svg

Siemens MAGNETOM Skyra, Руководство пользователя, Страница: 5 / 124

Поделиться
Скачать
Siemens MAGNETOM Skyra Скачать руководство пользователя страница 5

Siemens AG Healthcare Sector

11/12

Introduction – Page 1 of 4

  

Introduction

Dear customer,

On the occasion of inspections and controls by the authorities you must always have many different 
documents at hand. The present System Owner Manual is intended to make archiving these documents 
simpler for you so that you always have them completely at hand if necessary.

We have already filed the most important documents in the System Owner Manual on delivery of your 
system. 

The further updating of the Manual now lies in your hands.

We therefore recommend that you designate an employee right at the start-up of your new system who 
will be responsible for continuously updating the System Owner Manual and who immediately has it at 
hand as required.

We wish you much success with your Siemens system.

Siemens AG

Healthcare Sector

P.S.: The table on the following page shows which documents are filed in the System Owner Manual 
and who contributes the documents.

Manufac

tu

rer

Siemens

represen

ta

tiv

e

System Ow

ner

■

■

■

Содержание MAGNETOM Skyra





























































































































Отзывы:

Нет отзывов