Siemens MAGNETOM Skyra fit Скачать руководство пользователя страница 97

Страница: 97 / 131



Women and athletes are usually thoracic breathers.

Men and obese patients are usually abdominal breathers.

If the patient is an abdominal breather, place the respiration belt
around his abdomen.

– or –

If the patient is a thoracic breather, place the respiration belt
around his chest.



As an alternative, the respiratory cushion and belt can be used in
combination with the Body 18.

Slide the respiratory cushion underneath the respiratory belt.

✓

The respiratory cushion is attached.

Use the application cushion and position it on the patient together
with the PERU. (



Page 89 Preparing the measurement)

For respiratory triggering alone, position the electrode leads
loosely on the respiratory belt.

Connect the plug for the respiratory cushion to the appropriate
socket on the PERU.

Ensure that the pressure hose of the respiration cushion is not
crimped or bent. Make sure the respiration cushion is not unduly
compressed.

With quiet patients, a periodic signal will appear on-screen.

◆

Perform the examination. See:

Software operator manual

External triggering

Input for external trigger signal

The external trigger signal has to meet the following specifications:

Connecting the respiratory

cushion

Performing the examination

4.6

4.6.1

Physiological imaging

MAGNETOM Skyra

fit

| syngo MR E11

Print No. M6-04401.621.02.02.02

Содержание MAGNETOM Skyra fit




































































































































Результаты поиска

Содержание MAGNETOM Skyra fit

Отзывы:

Siemens MAGNETOM Skyra fit, Руководство оператора, Страница: 97 / 131

Результаты поиска

Содержание MAGNETOM Skyra fit

Отзывы: