manualshive.com logo in svg

Siemens MAGNETOM Skyra fit, Руководство оператора, Страница: 15 / 131

Поделиться
Скачать
Siemens MAGNETOM Skyra fit Скачать руководство пользователя страница 15

Safety

Preface about safety

Hazards and risks

An MR system may present various hazards. Some occur only during
the examination, while others exist permanently and thus are also
relevant to non-users (e.g. cleaning personnel).

The various hazards and the corresponding safety instructions are
explained in the safety chapter of this operator manual.

Common causes of accidents

Despite safety instructions, some hazards lead to accidents time and
again. In particular, this includes magnet accidents and RF burns/loop
formation, as well as the use of incompatible devices and the wearing
of clothing with electrically conductive materials. A detailed patient
screening ensures that the patient is free of metallic objects and
clothing with metallic yarns or appliqués.

The following sections provide information on how to avoid the most
common mistakes and the resulting safety risks. These sections were
prepared based on the long-time experience of Siemens.

Responsibility

Siemens accepts no responsibility for the safety, reliability, and
performance of the MR system, if the MR system is not used in
accordance with the instructions for use (Operator Manual, System
Owner Manual). Siemens is also not responsible for any direct or
indirect damages caused by incorrect operation. This includes, but is
not limited to, accidents with ferromagnetic objects. This applies
even if the consequences only become obvious at a later point in
time.

2

2.1

2.1.1

2.1.2

2.1.3

Safety

2

MAGNETOM Skyra

fit

 | syngo MR E11

15

Print No. M6-04401.621.02.02.02

Содержание MAGNETOM Skyra fit




































































































































Отзывы:

Нет отзывов