manualshive.com logo in svg

Siemens MAGNETOM Skyra fit, Руководство оператора, Страница: 117 / 131

Поделиться
Скачать
Siemens MAGNETOM Skyra fit Скачать руководство пользователя страница 117

Maintenance

Cleaning

All instructions in the operator manual regarding cleaning and, when
applicable, regarding disinfecting and sterilization must be always
observed.

WARNING

Improper cleaning of the MR system!

Risk of electric shock

◆

Only clean the MR system with a damp cloth.

For information regarding cleaning of RF coils, see: 

Operator Manual

Coils

Cleaning the LCD monitor/video display

The LCD monitor of the syngo Acquisition Workplace and the video
display are cleaned in the same way.

1

Clean the LCD monitor/video display at least every two months.

2

Prior to cleaning, switch off the LCD monitor/video display and
disconnect the main power plug. But if the monitor/display is under
hot running conditions, please wait till the monitor/display is
chilled (this can take up to one hour).

3

Clean the monitor/video display using a microfiber cloth.

4

If the LCD monitor/video display cannot be effectively cleaned with
the microfiber cloth: use window cleaner. Do not use window
cleaner on the monitor housing.

5

Immediately remove any water drops from the LCD monitor/video
display.

6

Avoid scratching the surface area of the LCD monitor/video display.

7

Avoid impacts to the LCD monitor/video display.

6

6.1

6.1.1

Maintenance

6

MAGNETOM Skyra

fit

 | syngo MR E11

117

Print No. M6-04401.621.02.02.02

Содержание MAGNETOM Skyra fit




































































































































Отзывы:

Нет отзывов