Siemens LR97CAP21B, Руководство пользователя

Страница: 13 / 24

Cleaning and servicing
en
13
Switching on the fan run-on
During the fan run-on, the appliance
continues to run for a short time and
then switches off automatically.
1.
Switch on fan setting 1, 2 or 3.
2.
Press ⁠.
a
The LED for the fan run-on and the
set fan setting light up in the LED
display.
a The appliance switches off auto-
matically after approx. 10 minutes.
Switching off the fan run-on
▶
Press ⁠.
a
The fan run-on mode is then pre-
maturely ended and the fan contin-
ues at the selected fan setting.
a
The LED for the set fan level lights
up in the LED display, but the LED
for the fan run-on no longer lights
up.
Switching on the lighting
The lighting can be switched on and
off independently of the ventilation
system.
▶
Press to switch on the lighting.
Setting the brightness
▶
Press and hold ⁠.
Switching off the lighting
▶
Switch off the lighting with ⁠.
Cleaning and servicing
Cleaning and servicing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
Cleaning products
You can obtain suitable cleaning
products from after-sales service or
the online shop.
ATTENTION!
Unsuitable cleaning products may
damage the surfaces of the appli-
ance.
▶
Do not use harsh or abrasive de-
tergents.
▶
Do not use cleaning products with
a high alcohol content.
▶
Do not use hard scouring pads or
cleaning sponges.
▶
Do not use any special cleaners
for cleaning the appliance while it
is hot.
▶
Do not use limescale remover on
the door handle or control panel,
as it may leave permanent stain-
ing.
▶
Only use glass cleaners, glass
scrapers or stainless steel care
products if recommended in the
cleaning instructions for the relev-
ant part.
▶
Wash sponge cloths thoroughly
before use.