Siemens LOGO! Скачать руководство пользователя страница 477

Страница: 477 / 534

Commissioning a project

6.7 OS update - Basic Panel PN

Basic Panels
Operating Instructions, 04/2012, A5E02421799-03

105

6.7

OS update - Basic Panel PN

6.7.1

Overview

Updating the operating system

A compatibility conflict may occur when transferring a project to the HMI device. This is

caused by different versions of the configuration software used and the HMI device image

available on the HMI device. If there are different versions, the transfer is aborted. A

message indicating a compatibility conflict is displayed on the configuring PC.
There are two ways to match the versions:
●

Update the HMI device image if the project was created with the most recent version of

the configuration software.

●

Transfer a matching version of the HMI device image if you do not want to adapt the

project for the HMI device to the most recent version of the configuration software for the

project.

NOTICE

Data loss
All data on the HMI device, such as the project and licenses, will be deleted when you

update the operating system.

Note
Calibrating the touch screen
After the update, you may have to recalibrate the touch screen.

Содержание LOGO!























































































































































































































































































































































































































































































































































Результаты поиска

Содержание LOGO!

Отзывы:

Бренды по названию

Популярные бренды

Siemens LOGO!, Руководство пользователя

Результаты поиска

Содержание LOGO!

Отзывы:

Бренды по названию

Популярные бренды