Siemens Logo! CM EIB, Руководство пользователя

Страница: 20 / 46

Commissioning
5.2 Operating states of the CM EIB
CM EIB
20
Manual, 03/2010, J31069-D1262-U002-A4-7618
5.2 Operating states of the CM EIB
The CM EIB is a LOGO! expansion module and has two LEDs that indicate the operating
state of the device. These are:
●
"RUN/STOP" LED: Communication with LOGO!
● "BUS" LED: EIB status
%.%$$$
/
;
(,%
0
$&'& 9
&0(,%.1;
5816723
%86
3URJ
Figure 5-1 CM EIB with the LEDs for indicating the operating state
The "RUN/STOP" LED can glow green, red, or orange and indicates the following operating
states:
RUN/STOP LED glows
Green (RUN) Red (STOP) Orange
The expansion module is
communicating with the device
on the left
The expansion module is not
communicating with the device
on the left
Initialization phase of the
expansion module
The "BUS" LED can glow green, red, or orange and indicates the following operating states:
BUS LED glows
Green Red Orange
Bus connection OK,
communication OK, no
programming mode
Bus connection fault Programming mode is active
and bus connection is OK