LOGO! Manual
A5E00067781 01
52
Parameterizing a block
Now enter the time T for the off delay:
1. If the cursor is not yet under the T,
move it there:
keys or
2. Switch to input mode:
OK
LOGO! displays the parameter window for parameters:
B02: the parameter of block
B02 T: is a time
+ Means: the parameter is
displayed in parameteriza-
tion mode and can be modi-
fied there
B02:T
T=00.00s+
Time value
Time unit
The cursor appears on the first position of the time value.
To change the time value, proceed as follows:
Use the keys and to move the cursor to different
positions.
Use the keys and to change the value.
When you have entered the time value, press OK.
Setting the time
Set the time T = 12:00 minutes:
1. Move the cursor to the first position:
or
2. Select ’1’:
or
3. Move the cursor to the second position:
or
4. Select ’2’:
or
5. Move the cursor to the unit:
or
6. Select the unit m for minutes:
or
Programming LOGO!
