Siemens LC97BHP50, Инструкция по установке и эксплуатации

Страница: 8 / 21

Imp
ort
Ap
plia
nce
s.c
om
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
Operating the appliance
en
7
1
Operating the appliance
Operating the appliance
These instructions apply to several appliance variants.
It is possible that individual features are described
which do not apply to your appliance.
Note:
Switch on the extractor hood when you start
cooking and switch it off again several minutes after you
have finished cooking. This is the most effective way of
removing the kitchen fumes.
Control panel
Setting the fan
Switching on
■
Touch the
#
symbol.
The fan starts at setting
ƒ
.
■
Touch the + or - symbol to alter the fan speed.
Switching off
Touch the
#
symbol.
Lighting
The lighting can be switched on and off independently
of the fan.
Touch the
=
symbol.
Setting the brightness
Press and hold the
=
symbol until the desired
brightness is reached.
Intensive setting
You can use the intensive setting if there is a large
build-up of odours and fumes/vapours.
Switching on
Touch the
@
symbol until
2
is shown on the display
panel.
Note:
After approx. 6 minutes, the extractor hood
automatically switches back to fan setting 3.
Switching off
If you want to end intensive mode before the preset
time expires, touch the
A
symbol to select the fan
setting you require.
Boost function
Switching on
Touch the
&
symbol.
Note:
After approximately 20 seconds, the extractor
hood automatically switches back to the fan setting that
was set beforehand.
Switching off
If you want to end the Boost function before the preset
time expires, touch the
&
symbol.
Fan run-on time
Switching on
Touch the
x
symbol.
The fan will run at fan setting 1.
After approximately 10 minutes, the fan will switch itself
off automatically.
Switching off
Touch the
x
symbol.
This immediately stops fan run-on.
Symbol Explanation
#
Fan on/off
=
Light on/off/dimming
A
Decrease fan setting
@
Increase fan setting/intensive mode 1, 2
&
Boost function (brief period at maximum power)
x
Fan run-on
Indicator/
symbol
Explanation
!
Metal grease filter saturation indicator
"
Activated charcoal filter saturation indicator
1-3 Fan settings
x
Fan run-on
2
Intensive mode