Siemens iQ700, Руководство по эксплуатации, Страница: 33 / 146

33
SIEMENS
Problem Probable cause Solution
The motor does
not work.
1. The iron is not in a
horizontal position.
2. The soleplate (12) is
heating up.
1. Use the iron in a
horizontal position.
2. Wait until the selected
temperature is reached.
Smoke comes out
when connecting
the iron for the first
time.
1. This may be caused by
the lubrication of some
of the internal parts.
1. This is normal and will
stop after a few minutes.
Deposits come out
through the holes
in the soleplate
(12).
1. Traces of lime scale are
coming out of the steam
chamber.
1. Carry out a cleaning
cycle (see “calc'n Clean
function” section).
The appliance
makes a pumping
sound.
1. Water is being pumped
into the steam chamber.
1. This is normal.
The automatic
clean warning
lamp “calc” (4)
flashes.
1. “calc'n Clean” reminder
has been activated.
1. Carry out a cleaning
cycle (see “calc'n Clean
function” section).
If none of the above solves the problem, get in touch
with an Authorised Technical Service.
Eng
LISH