Siemens INOX PRO SIMATIC IPC277D Скачать руководство пользователя страница 109

Страница: 109 / 182

SIMATIC IPC277D
Operating Instructions, 12/2016, A5E03409486-AE

109

Technical specifications

9.1

Certificates and approvals

CE marking

The device meets the requirements and safety specifications of the EMC Directive

2004/108/EC "Electromagnetic Compatibility".

EC Declaration of Conformity
The corresponding documentation is available on the Internet at: SIMATIC IPC277D

certificates (

http://support.automation.siemens.com/WW/view/en/48958258/134200

DIN ISO 9001 certificate

The Siemens quality management system for all production processes (development,

production and sales) meets the requirements of DIN ISO 9001:2000.
This has been certified by DQS (the German society for the certification of quality

management systems).
Certificate registration no. DE-000656 QM08

Software license agreements

If the device is supplied with preinstalled software, you must observe the corresponding

license agreements.

UL approval

Underwriters Laboratories (UL) complying with standard UL 508 and C22.2 No. 142

(IND.CONT.EQ)

Содержание INOX PRO SIMATIC IPC277D























































































































































































Результаты поиска

Содержание INOX PRO SIMATIC IPC277D

Отзывы:

Siemens INOX PRO SIMATIC IPC277D, Руководство по эксплуатации, Страница: 109 / 182

Результаты поиска

Содержание INOX PRO SIMATIC IPC277D

Отзывы: