Siemens HydroRanger 200 HMI, Руководство по эксплуатации

Страница: 281 / 404

Service and maintenance
9.5 Return procedure
HydroRanger 200 HMI
Operating Instructions, 06/2018, A5E36281317-AC
279
9.5 Return procedure
Enclose the bill of lading, return document and decontamination certificate in a clear plastic
pouch and attach it firmly to the outside of the packaging.
Required forms
● Delivery note
● Return goods delivery note
( http://www.siemens.com/processinstrumentation/returngoodsnote )
with the following information:
–
Product (item description)
– Number of returned devices/replacement parts
– Reason for returning the item(s)
● Decontamination declaration ( http://www.siemens.com/sc/declarationofdecontamination )
With this declaration you warrant "that the device/replacement part has been carefully
cleaned and is free of residues. The device/replacement part does not pose a hazard for
humans and the environment."
If the returned device/replacement part has come into contact with poisonous, corrosive,
flammable or water-contaminating substances, you must thoroughly clean and
decontaminate the device/replacement part before returning it in order to ensure that all
hollow areas are free from hazardous substances. Check the item after it has been
cleaned.
Any devices/replacement parts returned without a decontamination declaration will be
cleaned at your expense before further processing.
9.6 Transport
NOTICE
Transport with fitted battery
If the battery is still present in the device when transporting, it could become loose as a
result of vibrations and cause damage within the device.
•
Remove the batteries before returning the device.
• Dispose of the batteries according to regulations or include them separately in the return
consignment.