en
Basic settings
28
17.5 Remote diagnostics
Customer Service can use Remote Diagnostics to ac-
cess your appliance if you contact them, have your ap-
pliance connected to the Home Connect server and if
Remote Diagnostics is available in the country in which
you are using the appliance.
Tip:
For further information and details about the avail-
ability of Remote Diagnostics in your country, please
visit the service/support section of your local website:
www.home-connect.com
17.6 Data protection
Please see the information on data protection.
The first time your appliance is registered on a home
network connected to the Internet, your appliance will
transmit the following types of data to the
Home Connect server (initial registration):
¡
Unique appliance identification (consisting of appli-
ance codes as well as the MAC address of the Wi-Fi
communication module installed).
¡
Security certificate of the Wi-Fi communication mod-
ule (to ensure a secure data connection).
¡
The current software and hardware version of your
appliance.
¡
Status of any previous reset to factory settings.
This initial registration prepares the Home Connect
functions for use and is only required when you want to
use the Home Connect functions for the first time.
Note:
Please note that the Home Connect functions
can only be utilised with the Home Connect app. In-
formation on data protection can be retrieved in the
Home Connect app.
17.7 Declaration of Conformity
BSH Hausgeräte GmbH hereby declares that the appli-
ance with Home Connect functionality conforms to the
basic requirements and other relevant provisions of Dir-
ective 2014/53/EU.
A detailed RED Declaration of Conformity can be found
online at www.siemens-home.bsh-group.com among
the additional documents on the product page for your
appliance.
Hereby, BSH Hausgeräte GmbH declares that the ap-
pliance with Home Connect functionality is in compli-
ance with relevant statutory requirements.
A detailed Declaration of Conformity can be found on-
line at www.siemens-home.bsh-group.com/uk/ among
the additional documents on the product page for your
appliance.
2.4 GHz band (2400–2483.5 MHz): Max. 100 mW
5 GHz band (5150–5350 MHz + 5470–5725 MHz):
Max. 100 mW
BE
BG
CZ
DK
DE
EE
IE
EL
ES
FR
HR
IT
CY
LI
LV
LT
LU
HU
MT
NL
AT
PL
PT
RO
SI
SK
FI
SE
NO
CH
TR
IS
UK (NI)
5 GHz WLAN (Wi-Fi): For indoor use only.
AL
BA
MD
ME
MK
RS
UK
UA
5 GHz WLAN (Wi-Fi): For indoor use only.
18 Basic settings
You can configure the appliance to meet your needs.
18.1 Overview of the basic settings
Here you can find an overview of the basic settings
and factory settings. The basic settings depend on the
features of your appliance.
Basic setting
Selection
Language
See selection on the appli-
ance.
Clock
Clock in 24-hour format.
Date – day
Sets the current day
Date – month
Sets the current month
Date – year
Sets the current year
1
Factory setting (may vary according to model)
Basic setting
Selection
Water hardness
0 (softened)
1 (soft)
2 (medium)
3 (hard)
4 (very hard)
1
Signal tone
Short cooking time
Medium cooking time
1
Long cooking time
Volume
Five levels
Button tone
Switched on
Switched off
1
Display brightness
5 settings
1
Factory setting (may vary according to model)