Operating the appliance
en
17
11.
Empty the water tank and dry the cooking
compartment.
Cleaning the accessories
Clean the accessories thoroughly using soapy water
and a dish cloth or soft brush.
1
Operating the appliance
Operating the appliance
You have already learnt about the controls and how
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.
Switching the appliance on and off
Before you are able to set the appliance, you must
switch it on.
Exception: The childproof lock and the timer can be set
when the appliance is switched off.
Displays or information, e.g the residual heat indicator
in the cooking compartment, remain visible in the
display after the appliance has been switched off.
Switch off your appliance when you do not need to use
it. If no settings are applied for a long time, the
appliance switches itself off automatically.
Switching the appliance on
Use the
k
button to switch the appliance on.
The
k
symbol above the button is illuminated in blue.
The Siemens logo appears in the display, and then a
heating mode and a temperature.
Note:
You can specify which heating mode should
appear after the appliance is switched on in the basic
settings.
Switching off the appliance
Use the
k
button to switch the appliance off.
The lighting above the button goes out.
A set function is cancelled.
The time appears on the display.
Note:
You can set whether or not the time should be
displayed when the appliance is switched off in the
basic settings.
Starting or interrupting operation
To start operation or to interrupt an operation which has
started running, press the
u
button. The cooling fan
may continue to run after operation is interrupted.
Press the
k
button to delete all settings.
If you open the cooking compartment door during
operation, operation is interrupted. Close the cooking
compartment door to continue operation.
Selecting an operating mode
When you select an operating mode, the appliance
must be switched on.
1.
Press the
j
button.
The operating modes menu opens.
2.
Touch the required operating mode.
Depending on the operating mode, different options
are available.
3.
Use the rotary selector to change the selection.
Depending on the selection, change further settings.
4.
Use the
u
button to start.
The elapsed time appears in the display. The
settings and progress line can be seen.
Setting the type of heating and temperature
After the appliance is switched on, the set suggested
type of heating appears with the temperature. You can
apply this setting immediately with the
u
button. If
you want to set another type of heating, proceed as
follows.
For other settings, you can change the values as
follows:
Example in the picture: Top/bottom heating at 180 °C.
1.
Use the rotary selector to change the type of
heating.
2.
Touch the suggested temperature.
3.
Use the rotary selector to change the temperature.
4.
Use the
u
button to start.
The set type of heating and the temperature are shown
on the display.
&
7RSERWWRP
KHDWLQJ
$GGVWHDP
&
PLQV
$GGVWHDP
7RSERWWRP
KHDWLQJ
&
PLQV
$GGVWHDP
7RSERWWRP
KHDWLQJ
Содержание HN678G4.6W
Страница 2: ......