Siemens HiPath 3000 V3.0 or later Gigaset M1 Professional, Руководство по обслуживанию, Страница: 974 / 1202

Service
P31003-H3560-S403-54-7620, 09/05
12-12
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
service.fm
Service and Maintenance Tasks
12.2.3.1.2 APS transfer
Options
The APS Transfer feature is available with the HiPath 3000 Manager E. It facilitates
●
the on-site replacement of the APS by means of a direct connection via the V.24 interface
or preferably via the integrated analog/digital modem or via LAN.
●
an APS transfer via remote service from a central service center using the integrated an-
alog or digital modem or via LAN.
Function
This feature transfers the new APS in its entirety and stores it in the available area of the MMC.
After the transfer, the checksum is analyzed. The system subsequently reports whether or not
●
an error was found.
If so, you have to delete the transferred APS.
●
the APS transfer was successful.
You can then activate the APS immediately or at a later time.
Resetting the system initiates the changeover from the old APS to the new APS. If problems
occur during this process, the old APS is reactivated. Once the changeover is successful, the
old APS is deleted from the MMC.
In case of power outage, the SDRAM content that has no battery backup and the active APS
are completely lost. By re-accessing the current APS on the MMC, the system can be restored
to the state it was in prior to the power outage.
5. Use the “ APS stamp ” to verify that the new APS has been activated. Use Hi-
Path 3000 Manager E or Assistant T (menu item 29-1-2) to make the neces-
sary query.
Step Activity