Siemens HiPath 3000 V3.0 or later Gigaset M1 Professional, Руководство по обслуживанию, Страница: 691 / 1202

start_h3.fm
P31003-H3560-S403-54-7620, 09/05
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
5-13
Starting Up HiPath 3000
Starting Up HiPath 3750 and HiPath 3700
5.3.2.1 Assigning Station Numbers
The first time the system is initialized, the system determines its capacity and stores the result
in the CDB (customer database). After each system reset, the system accesses this data and
generates a continuous numbering plan.
If the system detects changes to the board configuration during startup, the following action is
taken:
If Then
Missing or defective board No action.
Different board type The system does not automatically activate the board.
Underequipped or same
board variant Board is activated. The same station range is used.
Over-equipped board variant Board is activated. The old station range is activated and the
ports associated with the new board are inserted at the end.
The ports are split if there is no contiguous station range avail-
able.
New board in empty slot
●
Board was the last one installed in accordance with the
placement sequence:
All boards are activated and the numbering plan continues
without a gap.
●
Board was inserted ahead of another board in the place-
ment sequence:
Board is activated and appended to the last board in the
numbering plan.