Siemens HiPath 1100, Руководство по обслуживанию

Страница: 210 / 389

Configuring the system specifically for the client
6-210
Service Manual
Table of the System’s Programming Codes
6.2.2 External line settings
Programmed
Functions
Code Intermediate data Data to be
programmed
Completing
data entry
Default
Groups of external
lines 156 group of external lines External line # instead of
group 0
Seizure priority by
type of external
line 194 1 - Standalone
2 - Digital
3 - Analog automatic 1 - Standal-
one
external analog line
seizure protocol 017 external analog line 1 - Loop seizure
2 - Ground seizure # instead of
external line 2 - Canada
1 - Other
countries
Caller ID for analog
lines (CLIP) 005 external analog line 0 - Disabled
1 - DTMF1
2 - DTMF2 (off hook)
3 - FSK # instead of
external line 1 - Brazil,
China, Peru,
India, IM-
Spain and IM-
English
2 - Russia
3 - Other
countries
external Line Call
Direction 155 External line 1 - Bidirectional
2 - Incoming unidirectional
3 - Outgoing unidirectional # instead of
external line 1 - Bidirec-
tional
Flash Duration in
analog line 118 external analog line 05 to 99
05 - 50 ms
99 - 990 ms # instead of
external line Country
*
Reseizure time for
external line 129 05 to 99
05 - 500ms
99 - 9900ms Automatic 05
Maximum time
between rings for
an incoming call 117 05 to 20 seconds Automatic 13 seconds
for Argentina
4 seconds for
Korea
06 seconds
for the other
countries
Coefficient for an
external Analog
Line 147 external analog line 1 - Standard line, 900
Ω
2 - 600
Ω
line
3 - Short line
4 - Long line
# instead of
external line 1 - Standard
line
Type of Answering
Signal
**
158 external analog line 0 - None
1 - Polarity Reversal
2 - DTMF Tone # instead of
external line 0 - None
Tone detector 160 external analog line
∗
- Yes
# - No
# instead of
external line
∗
- Yes
external line
connection. 133 group of external lines 1 - Direct
2 - Satellite PABX # instead of
external line 1 - Direct