Siemens HiNet LP5100, Руководство по эксплуатации и администрированию

Страница: 123 / 134

Annex
123
Error messages
An acoustic alarm has not been incorporated for reasons of user
acceptance. The error display on the telephone is limited to one
display output and acoustic signals possibly generated from the
network.
As a rule, error messages are shown in the bottom line of the dis-
play. This means that the connection between the original action
and the error which has occurred is retained.
Example:
It is not possible to deflect the incoming call:
In special cases, the top display line may also be used for display
outputs so that the cause of the error can be clearly described.
The error display can be acknowledged and "cleared away" man-
ually with either the
key or the key, in which case the tele-
phone goes into an error follow-up mode. If the error message is
not manually acknowledged, after 5 seconds have elapsed on the
timer, the telephone goes into the error follow-up mode automati-
cally.
08972261485
Deflection failed
Press the key or
the key