background image

Step by Step

System-wide parking (HiPath 4000)

44

44

44

44

Parking via "system parking" (only tele-
phones without a display)

Press key (must be installed).

9

 ... 

B

Enter and note a parking position number (0 to 9).

The call has been parked.

I

Replace the handset.

Taking a parked call

Via the keypad

C

Lift the handset or use the speakerphone function.

E

Enter the system code for "system parking" (if you have 
any problems ask your service personnel).

9

 ... 

B

Enter the parking position number (0 to 9) you have not-
ed and continue the call.

Via the repertory key

C

Lift the handset or use the speakerphone function.

Press the repertory key programmed with the system 
code + parking position number and continue call.

or

Press the repertory key programmed with the system 
code. 

9

 ... 

B

Enter the parking position number (0 to 9) you have not-
ed and continue call.

Via "system parking" (only for telephones with no 
display)

C

Lift the handset.

Press key (must be installed).

9

 ... 

B

Enter the parking position number (0 to 9) you have not-
ed and continue call.

System parking

Enter the code!

System parking

Содержание Hicom 300 H








































































































































































Отзывы: