background image

System-wide parking (HiPath 4000)

43

43

43

43

Step by Step

Parking a call manually and then 
taking it at a later date

You can manually park a call to your telephone at a free 
parking position and take it at your telephone or another 
telephone at a later date. This function can also be used 
with telephones that do not have a display.

Parking via the keypad

Confirm.

E

Enter the system code for system parking (if you have 
any problems ask your service personnel).

9

 ... 

B

Enter and note a parking position number (0 to 9). 

The call has been parked. 

I

Replace the handset.

Parking via a repertory key

The system code for "system parking" + a parking num-
ber or only the system code for "system parking" is pro-
grammed on a repertory key (

Æ

page 66).

Confirm.

Press programmed repertory key. 

or

Press programmed repertory key. 

9

 ... 

B

Enter and note a parking position number (0 to 9). 

The call has been parked. 

I

Replace the handset.

Consultation?

Enter the code!

Consultation?

Содержание Hicom 300 H








































































































































































Отзывы: