Siemens HB56 1 Series, Инструкция по эксплуатации

Страница: 10 / 36

10
Time functions
The time functions menu is accessed using the button 0 . The
following functions are available:
When the oven is off:
■
Q = set the timer
■
0 = set the time
When the oven is on:
■
Q = set the timer
■
x = set the cooking time
■
y = delay the end time
Setting the time-setting options ­ in brief
1.
Press the 0 button repeatedly until the arrow is next to the
required symbol, e.g. set cooking time function = Nx .
2.
Set the desired value with the rotary selector.
3.
Press the 0 button repeatedly until the Î rotary symbol
disappears from the clock display.
A detailed description of how to adjust each individual function
is provided below.
Short audible signal
If you cannot change or set a value, you will hear a short
audible signal.
Programming the timer
The timer works independently of the oven.It can be used as a
kitchen timer and programmed at any time.
1.
Press the
0
button.
The time function menu opens.The arrow
N
is located to the
left of the symbol Q . The control knob symbol Î on the two
points indicates that the time can be programmed using the
control knob.
2.
Set the time for the timer using the control knob.
3.
Press the
0
button repeatedly until the control knob
symbol
Î
disappears from the time indicator.
The time indicator shows the time elapsed from the set time.
When the time has elapsed
A signal sounds. The time on the timer has reached ‹ : ‹‹ .
Press the 0 button. The display goes out.
Cancelling the timer time
Press the
0
button to open the menu. Turn the timer time back
to
‹
:
‹‹
. Press the
0
button repeatedly until the
Î
rotary
symbol disappears from the clock display.
Changing the timer time
Open the menu with the 0 button and use the rotary selector
to change the time. Press the 0 button repeatedly until the Î
rotary symbol disappears from the clock display. The menu is
exited. The new time counts down.
Setting the cooking time
When a duration (cooking time) is programmed for a dish, the
oven stops automatically when this time has elapsed. The oven
will stop heating.
Prerequisite: a heating type and temperature must be set.
Example in the picture: top and bottom heat configuration
% ,
180 °C, cooking time 45 minutes
1.
Press the 0 button twice.
The arrow is located in front of the cooking time symbol Nx .
The control knob symbol Î on the two points indicates that
the time can be programmed using the control knob.
2.
To set the time using the control knob.
3.
Press the button 0 repeatedly until the control knob
symbol Î disappears from the time indicator.
The configuration is applied.
4.
If the oven has not been started, press the button † .
The time indicator shows the time elapsed of the set time.
The cooking time has elapsed
A signal sounds. The oven stops heating.
‹
:
‹‹
is shown on
the clock display. You can cancel the audible signal earlier by
pressing the
0
button.
To cancel a cooking time
Using the button 0 , adjust the cooking time Nx . To reset the
cooking time to ‹ : ‹‹ using the control knob. Press the 0
button repeatedly until the control knob symbol Î disappears
from the time indicator.
Adjusting the cooking time
Using the
0
button, adjust the cooking time
Nx
. Change the
cooking time using the control knob.Press the
0
button
repeatedly until the control knob
Î
symbol disappears from
the time indicator. The time elapsed of the changed time is
displayed.
Calling up the clock, cooking time and end time
You can call up all the functions with the 0 clock button.
RQ
RII
VWDUW
VWRS
ƒ&NJ
0 3
FOHDQ
VWDUW
VWRS
ƒ&NJ