Siemens HB53CR550, Инструкция по эксплуатации

Страница: 9 / 24

9
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The time-setting options symbol is in
the foreground and preceded by the N arrow.
To call up the V timer, x cooking time, y end time or 0
clock, press the 0 button repeatedly until the N arrow is next
to the relevant symbol. The display shows the value for a few
seconds.
Clock
After the appliance is connected or following a power cut,
the 0 symbol and three zeros are lit in the display. Set the
clock.
1.
Press the 0 button.
The time 12:00 is shown in the display.
2.
Use the @ or A button to set the clock.
After a few seconds, the time that has been set is adopted.
Changing the clock
No other time-setting option should have been set.
1.
Press the
0
button four times.
The time symbols light up in the display and the
N
arrow is
next to
0
.
2.
Use the
@
or
A
button to change the clock.
After a few seconds, the time that has been set is adopted.
Hiding the clock
You can hide the clock. For more information, please refer to
the section Changing the basic settings .
Childproof lock
The oven has a childproof lock to prevent children switching it
on accidentally.
The oven will not react to any settings. The timer and clock can
also be set when the childproof lock has been activated.
If the type of heating and temperature or grill setting have been
set, the childproof lock interrupts the heating.
Activating the childproof lock
No cooking time or end time should have been set.
Press and hold the @ button for approx. four seconds.
The
@
symbol appears in the display. The childproof lock is
activated.
Deactivating the childproof lock
Press and hold the @ button for approx. four seconds.
The
@
symbol goes out in the display. The childproof lock is
deactivated.
Changing the basic settings
Your oven has various basic settings. These settings can be
customised to suit your requirements.
No other time-setting option should have been set.
1.
Press and hold the
0
button for approx. 4 seconds.
The current basic setting for the clock display is shown in the
display, e.g. c1 1 for selection 1.
2.
Use the
@
or
A
button to change the basic setting.
3.
Confirm by pressing the
0
button.
The next basic setting appears in the display. You can scroll
through all levels with the
0 button and change the setting
with the
@
or
A
button.
4.
To finish, press and hold the
0
button for approx. 4 seconds.
All basic settings are applied.
You may change the basic settings at any time.
Cleaning system
The cleaning system regenerates the self-cleaning surfaces in
the cooking compartment.
The back wall, ceiling and side walls of the cooking
compartment are coated with a highly porous ceramic layer.
This coating absorbs and disintegrates splashes from baking
and roasting while the oven is in operation. If these self-
cleaning surfaces no longer clean themselves adequately, they
can be regenerated with the cleaning system.
Before cleaning
Remove accessories and cookware from the cooking
compartment.
Cleaning the cooking compartment floor
Before you set the cleaning system, clean the surfaces in the
cooking compartment that are not self-cleaning. Otherwise,
stains will develop that it is not possible to remove.
Use a dish cloth and hot soapy water or a vinegar solution. If
there are heavy deposits of dirt, use a stainless steel scouring
pad or oven cleaner. Only use when the cooking compartment
is cold. Never treat the self-cleaning surfaces with a scouring
pad or oven cleaner.
Basic setting Selection 1 Selection 2 Selection 3
c1 Clock display always* only with
the
0
button
-
c2
Signal duration upon
completion of a
cooking time or
timer period
approx.
10 second
s
approx.
2 minutes*
approx.
5 minutes
c3
Waiting time until a
setting is applied
approx.
2 seconds
approx.
5 seconds*
approx.
10 second
s
* Factory setting