Time-setting options
en
11
8.1 Setting rapid heating
To ensure an even cooking result, do not place the
food in the cooking compartment until rapid heating
has come to an end.
Note:
Do not set a cooking time until rapid heating has
come to an end.
1.
Set a suitable type of heating and a temperature of
at least 100 °C.
2.
Press the button.
a
appears in the display.
a
Rapid heating starts after a few seconds.
a
Once rapid heating has ended, an audible signal
sounds and the symbol goes out in the display.
3.
Place the food in the cooking compartment.
9 Time-setting options
Your appliance has different time-setting options, with
which you can control its operation.
9.1 Overview of the time-setting options
With the button, select the different time-setting op-
tions.
Time-setting
option
Use
Timer
The timer can be set independently
of the appliance when it is in opera-
tion. It does not affect the appliance.
Cooking time
If you set a cooking time, operation
of the appliance stops automatically
once this time has elapsed.
End time
For the cooking time, you can set the
time at which operation ends. The
appliance starts up automatically so
that it finishes cooking at the re-
quired time.
Time
You can set the time.
9.2 Setting the timer
The timer runs independently of the appliance when it
is in operation. The timer can be set when the appli-
ance is switched on or off, up to 23 hours and 59
minutes. The timer has its own audible signal so that
you can tell whether it is the timer or a cooking time
which has elapsed.
1.
Press the button repeatedly until is highlighted
in the display.
2.
Use the or button to set the timer duration.
Button
Default value
5 minutes
10 minutes
The timer duration can be set in 30-second incre-
ments up to 10 minutes. Above 10 minutes, the
time increments become longer the higher the
value.
a
The timer starts and the timer duration begins to
count down after a few seconds.
a
An audible signal sounds and the timer duration is
zero in the display when the timer duration has
elapsed.
3.
Once the timer duration has elapsed:
‒
Press any button to switch off the timer.
Changing the timer
You can change the timer duration at any time.
Requirement:
is highlighted on the display.
▶
Use the or button to change the timer duration.
a
The appliance applies the change after a few
seconds.
Cancelling the timer
You can cancel the timer duration at any time.
Requirement:
is highlighted on the display.
▶
Use the button to reset the timer duration to zero.
a
After a few seconds, the appliance applies the
change and goes out.
9.3 Setting the cooking time
You can set a cooking time for operation of up to 23
hours 59 minutes.
Requirement:
The type of heating and temperature or
setting are set.
1.
Press the button repeatedly until is highlighted
in the display.
2.
Use the or button to set the cooking time.
Button
Default value
10 minutes
30 minutes
The cooking time can be set in 1-minute increments
up to 1 hour, and then in 5-minute increments.
a
The appliance starts heating and the cooking time
counts down after a few seconds.
a
If the cooking time has elapsed, an audible signal
sounds and the display shows the cooking time as
zero.
3.
When the cooking time has elapsed:
‒
Press any button to end the audible signal before
it sounds.
‒
To set a cooking time again, press the button.
‒
When your food is ready, switch off the appli-
ance.
Changing the cooking time
You can change the cooking time at any time.
Requirement:
is highlighted on the display.
▶
Change the cooking time using the or button.
a
The appliance applies the change after a few
seconds.
Cancelling the cooking time
You can cancel the cooking time at any time.
