Siemens Gigaset talk & surf 6.0 Скачать руководство пользователя страница 76

Страница: 76 / 188

Configuring the base station

talk&surf V.6 / englisch / A31008-X100-B100-1-76D1 / Einstellen.fm / 17.09.2003

Configuring record and play

Only available for Gigaset SX255isdn and Gigaset SX353isdn.

Double-click

Configuration

Folder List

This displays the dialogues available.

Click

Local Answering Machine

The device list and the corresponding tabs are then displayed.

Open the

General

tab.

In the device list, click the answering machine you want to configure.

This highlights the row. Below the device list you will see the active and changeable

settings for the selected answering machine.

In the

Settings > Recordings

section you can define the options for recording and

playing back your messages:

Recording

– In the

Quality

field, choose whether the quality of the recording is to be reduced

in favour of longer recording capacity.

– In the

Message length

field, define the maximum recording length for each

message. With the

maximum

option you leave the entire available memory free

for recording a message.

Replay

– Activate the

Time stamp

option if the date and time the message was received is

to be announced before playing the message.

– Select the option

Automatic pause

for playing several messages. The answering

machine switches to pause mode after playing back a message. If there are no

more entries, the answering machine switches back to idle after a further 60 sec-

onds.

– Use the slider in the

Playback speed

section to set the speed at which the mes-

sages are played back.

In the

Number of ring tones

field, select the number of ringer tones after which the

answering machine should record an incoming call:

Enter a number between 1 – 9 rings.

Choose the option

auto 2/4

The answering machine reacts after the fourth ringer tone if there are no new mes-

sages. If a new message has been recorded, the reaction time is cut to two ringer

tones.

The settings displayed apply only to the selected answering machine.

The

auto 2/4

option enables you to avoid unnecessary connection

charges with

Remote access

Hang up as soon as you hear the third ringer tone. Your answering

machine has not recorded any new messages.

Содержание Gigaset talk & surf 6.0





























































































































































































Результаты поиска

Содержание Gigaset talk & surf 6.0

Отзывы:

Похожие инструкции для Gigaset talk & surf 6.0

Бренды по названию

Популярные бренды

Siemens Gigaset talk & surf 6.0, Руководство по эксплуатации

Результаты поиска

Содержание Gigaset talk & surf 6.0

Отзывы:

Похожие инструкции для Gigaset talk & surf 6.0

Бренды по названию

Популярные бренды