87
Configuring the Advanced Settings
Gigaset SX541 WLAN dsl / englisch / A31008-M1025-L101-1-7619 / configure_router.fm / 21.07.2005
Sc
hablone 2005_05_02
Port Triggering
If you configure port triggering for a certain application, you need to identify a so-called
trigger port and the protocol (TCP or UDP) this port uses. You then assign the public
ports that have to be opened for the application to this trigger port.
You can select known Internet services for this or assign ports or blocks of ports manu-
ally.
ì
To set up port triggering for a service, select
Port Triggering
in the
Address Trans-
lation (NAT)
menu.
ì
Select the required application from the
Predefined applications
list.
ì
Select the option in the
Enabled
column.
ì
Click the
Add
button. The data for the required service is entered on the screen.
If the application you require is not in the list, you must enter the relevant data on the
screen manually:
ì
Local protocol
: Select the protocol that is to be monitored for outgoing traffic.
ì
Local port
: Enter the port that is to be monitored for outgoing traffic.
ì
Public protocol
: Select the protocol that is to be allowed for incoming data traffic.
ì
Public port
: Enter the port that is to be opened for incoming traffic.
ì
Comment
: Enter a description to help you identify different entries.
Note:
You can enter a single port number, several individual port numbers separated by
commas, port blocks consisting of two port numbers separated by a dash or any
combination of these, for example
80,90-140,180
).
