Siemens Gigaset SX303isdn Скачать руководство пользователя страница 52

Страница: 52 / 183

SMS (text messages)

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / sms.fm / 14.11.2005

SMS (text messages)

You can use your base station to send and receive SMS text messages (

hort

essage

ervice). You ca send an SMS to any fixed network or mobile phone network number.

Your SMS can be received as a text message by any device with SMS functionality

(mobile phone, PC, another telephone). If the recipient of your SMS does not have a

phone with SMS functionality, then the SMS is played back.

General

Text messages are exchanged between SMS centres that are operated by service

providers. The telephone number of the SMS centres through which you wish to send

and receive text messages must be entered in your phone (page 50). Up to ten SMS

centres can be entered. By default, the

SMS Service Centre "Anny Way"

and

the

provider's SMS service

are preconfigured. You can change the telephone numbers of

the SMS centres.
You ca receive text messages via

any

of the SMS centres whose number you have

entered. Of course you must be registered to receive text messages with those SMS

centres (page 52).
Your text message is sent through the SMS centre that is entered as the

active

send

service centre.

Before you can send and receive text messages

◆

Your network provider supports SMS in the fixed network. Contact your network pro-

vider for more information.

◆

Calling Line Identification may not be permanently deactivated for the MSN used

(page 24).

◆

To receive text messages you must be registered with your service provider

(page 52).

◆

You must not allow the network provider to bar the phone numbers you have

entered for SMS centres.

If the telephone of a receiver cannot receive an SMS in the fixed network, the SMS is

automatically read as a voice message. Between 7.00 and 22.00 hrs, these text

messages are delivered immediately in the form of a telephone call. Text messages sent

after 22.00 hrs are stored and delivered the next day.

Managing SMS service centres

SMS messages are exchanged through SMS service centres. To send and receive a text

message, you require the phone number for your service provider's SMS centre. You

have to store this phone number in your telephone.
You may enter up to ten SMS centres in your telephone.

Sending an SMS – send centre

You must enter the phone number of the SMS centre via which you want to send the

SMS in your telephone and activate it as the "send centre" (page 50 and pag e 51). This

phone number will be used for sending all SMS messages.

Содержание Gigaset SX303isdn
























































































































































































Результаты поиска

Содержание Gigaset SX303isdn

Отзывы:

Похожие инструкции для Gigaset SX303isdn

Бренды по названию

Популярные бренды

Siemens Gigaset SX303isdn, Руководство пользователя

Результаты поиска

Содержание Gigaset SX303isdn

Отзывы:

Похожие инструкции для Gigaset SX303isdn

Бренды по названию

Популярные бренды