Siemens GIGASET SE681 WIMAX Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 72

background image

6

Information about the optional outdoor antenna

Gigaset SE681 WiMAX / engbt / A31008-N923-R101-2x-7619 / Safety.fm / 27.3.08

Sc

hablone 2

007_

10_1

9

Information on Specific Absorption Rate (SAR)

This device meets the limits for protecting the health of the public from the effecs of
exposure to electromagnetic fields when it is operated in connection with the desig-
nated antenna(s) like described in the user manual.
Your device is a radio transmitter and receiver. It is designed and manufactured not to
exceed the limits for exposure to emission from electromagnetic fields recommended
by international guidelines from the International Commission on Non-Ionizing Radia-
tion Protection (ICNIRP). These limits are part of comprehensive guidelines for the pro-
tection of the public and establish permitted levels of exposure to electromagnetic radi-
ation for the population. The guidelines were confirmed by independent scientific
organisations through periodic and thorough evaluation of scientific studies. The limits
include a substantial safety margin designed to assure the safety of all persons, regard-
less of age and health.
The exposure limit employs a unit of measurement known as the Specific Absorption
Rate, or SAR. The SAR limit stated in the international guidelines is 2.0 W/kg. Tests for
SAR are conducted in all frequency bands with the device transmitting at its highest
power level with minimum possibledistance to the body. The actual SAR level of the
device during operation with the designated antenna(s) is below the maximum value
and is additonally decreased by a distance to the device. This is because the device is
designed to operate at multiple power levels so as to use only the power required to
enable seamless network connection.

Information about the optional outdoor antenna

Wall duct:

To connect the Gigaset SE681 WiMAX to the outdoor antenna, the antenna cable must
be fed through the wall to the outside of the building. It must be possible to make a suit-
able wall or window duct at or near the location of the Gigaset SE681 WiMAX.

Setting up the antenna mast:

There should not be any obstructions (walls, trees etc.) in front of the antenna.

W

Only one of the antennas listed on page 13 must be used.
The outdoor antenna must be installed and put into service by a qualified
electrician.

ì

Only commence the outdoor work once you have taken all the neces-
sary steps to make the location safe.
Be sure to observe the safety instructions.

«
...
4
5
6
7
8
...
»

Содержание GIGASET SE681 WIMAX









































































Отзывы:

Нет отзывов

Похожие инструкции для GIGASET SE681 WIMAX

Бренд: Magellan Страницы: 24

Бренд: GIGAMEDIA Страницы: 4

Бренд: Ubiquiti Страницы: 32

Бренд: Shiro Страницы: 83

Бренд: Telrad Страницы: 10

Бренд: Firetide Страницы: 32

Бренд: Modecom Страницы: 48

Бренд: Deliberant Страницы: 69

Бренд: MAKER MADE Страницы: 40

ZEB THUNDER Pro

Бренд: Zebronics Страницы: 7

Бренд: Audio Technica Страницы: 36

Бренд: Kraun Страницы: 55

Бренд: Bountiful Страницы: 1

Бренд: Linksys Страницы: 16

Бренд: Canon Страницы: 7

Бренд: Cerio Страницы: 13

Бренд: Alfa Network Страницы: 115

Бренд: Audio Technica Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды