56
Configuring the Advanced Settings
Gigaset SE365 WLAN / englisch / A31008-M1064-R101-1x-7619 / advanced_config.fm / 19.09.2007
Sc
hablone 2
005_0
7_2
7
WEP encryption
If WPA2-PSK/WPA-PSK is not supported by all components in your wireless network, we
advise you activate
on your wireless network components.
ì
In the
Security
field, select the option
WEP
.
ì
Select the
Authentication type
:
– Select
Shared
to require that each client registers on the network with a
specified key.
– Select
Open
to permit data transfer within your wireless network without the
need for a key.
You can choose either the standard 64-bit key or the more robust 128-bit key for encryp-
tion. The keys are generated in hexadecimal or ASCII format. You must use the same
keys for encryption and decryption for both the Gigaset SE365 WLAN and all your wire-
less network adapters.
ì
Select the
Key length
: 64 bit or 128 bit.
ì
Select the
Key type
,
Hex
or
ASCII
.
If you select
Hex
you can use the characters
0
to
9
and
A
to
F
.
– With a 64-bit encryption depth the key is exactly 10 characters long.
An example of a valid key: 1234567ABC
– With a 128-bit encryption depth the key is exactly 26 characters long.
An example of a valid key: 234567ABC8912345DEF1234567
Note:
WPS is not supported for WEP encryption.
