63
Appendix
Gigaset S645 / GBR / A31008-M1634-L101-1-7619 / appendix.fm / 27.08.2004
Service (Customer Care)
We offer you support that is fast and tai-
lored to your specific needs!
Our Online Support on the Internet:
www.siemens-mobile.com/gigasetcus-
This site can be accessed at any time wher-
ever you are. It will give you 24/7 support
for all our products. It also provides inter-
active troubleshooting, a list of FAQs and
answers plus operating instructions for
you to download. You will find frequently
asked questions and the answers in this
User Guide in the Questions and Answers
chapter in the appendix.
For personal advice on our range of prod-
ucts, call
Premium-Hotline:
0906 9597555
0.75 £/minute
You can talk to qualified Siemens techni-
cians who will guide you expertly through
product information and installation. For
fast and dependable assistance with any
repairs, warranty/guarantee claims, con-
tact our Service Centers.
Service Center:
08705 334411
Please have your receipt ready when call-
ing.
Replacement or repair services are not
offered in countries where our product is
not sold by authorised dealers.
Authorisation
Your Gigaset is designed for operation in
the countries specified on the underside
of the device. Country-specific conditions
have been taken into account. The CE
mark attests to the phone's compliance
with the essential requirements of the
R&TTE directive.
The caller cannot hear you.
The handset is "muted". You have pressed the
key
u
(on the handset) or the key
l
(on the base station).
¥
Switch the microphone back on (page 15/
page 17).
The number of the caller is not displayed
despite CLIP
.
Calling Line Identification is not released.
¥
The caller should release Calling Line
Identification
(CLI) with the network pro-
vider.
You hear an error tone when keying an input
(a descending sequence of tones).
Action has failed/invalid input.
¥
Repeat the operation.
Watch the display and refer to the operating
instructions if necessary.
You cannot listen to the T-NetBox
.
Your PABX is set for dial pulsing.
¥
Switch your PABX over to tone dialling.
No time is specified for a message in the
calls list.
Date/time are not set.
¥
Set the date/time (page 9).
The answering machine reports "PIN is incor-
rect" to the remote control.
1. You have entered the wrong PIN
¥
Enter the system PIN again,
2. The system PIN is still set to 0000.
¥
Set the system PIN different to 0000
The answering machine records no mes-
sages/has switched over to announcement.
Its memory is full.
¥
Delete old messages (page 39/page 42).
¥
Listen to and delete new messages