68
Making VoIP settings
Gigaset S450 IP LBA / IM-Nord_en / A31008-M1713-R221-2-7619 / settings_bs_hs_pabx.fm / 28.3.07
Ve
rs
ion 4,
16
.09.
2005
will be displayed, and the message key
f
flashes.
f
Press the message key.
§Yes§
Press the display key to con-
firm the prompt.
~
Enter the system PIN and press
§OK§
.
The new data for your VoIP provider will be
downloaded and saved on the phone.
Entering/changing VoIP user data
The VoIP settings must also be extended
for your personal data. You will receive all
necessary data from your VoIP provider.
v
¢
Ð
Settings
¢
Telephony
¢
VoIP
(enter system PIN)
¢
Provider Registr.
¤
Change multiple line input:
Username:
Enter the user name (caller ID) for your
VoIP provider account. The
Username
is
usually identical to your Internet phone
number (the first part of your SIP
address see page 85).
Authent. Name: / Authent. Password:
Enter the provider-dependent access
data that has to be transferred by the
phone to the SIP service at registration.
¤
Click
§Save§
to save the settings.
Setting the phone's IP address
in LAN
The base station requires an IP address in
order to be "recognised" by the LAN.
The IP address can be assigned to the base
station (by the router) automatically or
manually.
u
If performed
dynamically,
the router's
DHCP server automatically assigns the
base station an IP address. The base
station's IP address can be changed
according to router settings.
u
If performed manually/
statically
, you
assign the base station a static IP
address. This may be necessary
depending on your network configura-
tion.
v
¢
Ð
Settings
¢
Base
¢
Local Network
~
Enter the system PIN and press
§OK§
.
¤
Change multiple line input:
IP Address Type:
Select
Static
or
Dynamic
. Select
If you select
Static
, you must manually
define the IP address and the subnet
mask for the base station in the next
lines, as well as the standard gateway
and DNS server.
IP Address:
For
IP Address Type
=
Dynamic
:
The IP address that is currently assigned
to the base station will be displayed. It
cannot be amended.
For
IP Address Type
=
Static
:
Please note:
– If you reply to the request with
§No§
, the dis-
play will not be repeated. The message
New profile available
will only be shown
again if a newer version of the VoIP settings
than the one rejected is available.
– You can specify the automatic version
check via the Web configurator (page 100).
Please note:
Please note when making these entries that
the VoIP user data is case sensitive. To enter
text see page 112.
Please note:
– For how to make the local network settings
on the Web configurator, turn to page 82.
– To assign the IP address dynamically, the
DHCP server on the router must be acti-
vated. Please also read the user guide for
your router.