46
Base station settings
Gigaset E455 SIM Eco / GBR / A31008-M1725-L111-1-7619 / registr_sett.fm / 12.11.08
¤
Save changes (page 54).
You cannot deactivate the confirmation
tone for placing the handset in the base
station.
Setting the alarm clock
Requirement:
The date and time have
already been set (page 9).
Activating/deactivating and setting the
alarm clock
v
¢
ì
¤
Change multiple line input:
Alarm Clock:
Select
On
or
Off
.
Time:
Enter the wake-up time in 4-digit for-
mat.
Melody:
Select melody.
Volume:
Set the volume (1-6).
¤
Save changes (page 54).
You will see the icon
¼
.
A wake-up call with the selected ringer
melody is signalled on the handset. The
wake up call sounds for 60 seconds. The
display shows
Alarm Clock
. If no key is
pressed the wake-up call is repeated twice
at five minute intervals and then switched
off.
During a call, the wake-up call is signalled
by a short tone.
Deactivating the wake-up call/
repeating after a pause (slumber
mode)
Requirement
: A wake-up call is sounding.
§OFF§
Press the display key. The
wake-up call is deactivated.
or
§Snooze§
Press the display key or any
key. The wake-up call is deacti-
vated and then repeated after
5 minutes. After the second
repetition the wake-up call is
deactivated completely.
Restoring the handset
default settings
You can reset any individual settings and
changes that you have made. This will not
affect entries in the directory, call-by-call
list, calls list, or SMS lists or the handset's
registration to the base station.
v
¢
Ð
¢
Handset
¢
Reset Handset
§Yes§
Press the display key.
a
Press
and
hold
(idle status).
Cancel the restoring process by pressing
a
or the display key
§No§
.
Base station settings
The base station settings are carried out
using a registered Gigaset E45 handset.
Protecting against unauthorised
access
Protect the system settings of the base sta-
tion with a PIN known only to yourself.
The system PIN must now be entered
when, for example, registering/de-regis-
tering a handset to/from the base station
or when restoring the default settings.
Changing the system PIN
You can change the 4-digit system PIN set
on the base station (default setting: 0000)
to a 4-digit PIN known only to yourself.
Caution:
Memorise the new system PIN well! If you for-
get it, the phone will require specialist atten-
tion. If this happens, contact the Hotline