
40
Base station settings
Gigaset E450 Eco / IM-Nord EN / A31008-M1702-R211-1-SM19 / registr_sett.fm / 18.10.2008
Base station settings
The base station settings are carried out
using a registered Gigaset E45 handset.
Protecting against unauthorised
access
Protect the system settings of the base sta-
tion with a PIN known only to yourself.
The system PIN must now be entered
when, for example, registering/de-regis-
tering a handset to/from the base station
or when restoring the default settings.
Changing the system PIN
You can change the 4-digit system PIN set
on the base station (default setting: 0000)
to a 4-digit PIN known only to yourself.
v
¢
Ð
¢
Base
¢
System PIN
~
Enter current System PIN and
press
§OK§
.
~
Enter new system PIN. For
security the PIN is shown as
four stars (****).
s ~
Scroll to the next line, re-enter
new system PIN and press
§OK§
.
a
Press
and
hold
(idle status).
Activating/deactivating the
wait melody
v
¢
Ð
¢
Base
¢
Music on hold
Press
§OK§
to activate or deactivate the wait
melody (
= on).
Repeater support
With a repeater you can increase the range
and reception strength of your base sta-
tion. First you must activate the repeater
mode. This will terminate any calls cur-
rently running through the base station.
Requirement:
A repeater is registered.
Eco mode is disabled.
v
¢
Ð
¢
Base
¢
Add. Features
¢
Repeater Mode
§Yes§
Press the display key.
When repeater mode is active, the menu
item is marked with .
Restoring default settings to
base station
When resetting, the handsets remain reg-
istered and eco mode is disabled. The fol-
lowing settings are not reset:
u
System PIN
u
Setting "First ringtone suppressed"
u
SMS info services
v
¢
Ð
¢
Base
¢
Base Reset
~
Enter the system PIN and
press
§OK§
.
§Yes§
Press the display key.
Cancel the restoring process by pressing
a
or the display key
§No§
.
Caution:
Memorise the new system PIN well! If you for-
get it, the phone will require specialist atten-
tion. If this happens, contact the Customer
Care Centers (page 44).
Please note:
Repeater support and eco mode (see page 9)
rule each other out, i.e. both functions cannot
be used at the same time.
‰
‰