125
Setting up the base
Gigaset DX800A all in one / GRC EN / A31008-N3100-T101-1-7619 / settings.fm / 31.08.10
V
e
rsion 4, 16.0
9
.2005
Setting up the base
Your base is preconfigured but you can
change the settings to suit your individual
requirements.
The settings described in this chapter only
have a local effect on the base. The corre-
sponding setting on any of the registered
handsets does not change.
Accessing functions and
numbers quickly
You can program the six function keys on the
right-hand side of the base and the display
keys (in idle status). You can assign a phone
number (quick dial) or a base function to
each of these keys and change the assign-
ment.
The number is then dialled or the function
started by simply pressing a key.
Changing key assignments
In idle status:
¤
Press and
hold
the display/function key
until a list of possible key assignments is
displayed.
The following functions are available:
Quick Dial
Assign a number from the local directory
to the key.
The directory is opened.
¤
Select an entry and press
§OK§
.
If you delete or edit the entry in the direc-
tory, this will
not
affect the assignment to
the function key or display key.
This means that if the phone number
changes, you must re-assign the updated
entry from the directory to the key as
described above.
Alarm Clock
Assign menu for setting and activating
the alarm clock to a key
:
v
¢
Í
Organizer
¢
Alarm Clock
Calendar
Open calendar/enter new appointment
:
v
¢
Í
Organizer
¢
Calendar
Bluetooth
Activate/deactivate Bluetooth mode
.
Connect Mobile
Activate Bluetooth on the base and
establish a connection to the active
Bluetooth mobile
.
Headset
Accept or pick up a call with the con-
nected headset. The key simulates the
P2T function (push-to-talk). You must
assign
Headset
to a key if you wish to use
a headset without P2T (wire-bound or via
Bluetooth).
Press the key
– If a call is signalled on the base and
you wish to accept the call directly on
the headset.
– To continue a call on the headset that
has been started on the base.
If two headsets are connected to the
base, a wire-bound and a Bluetooth
headset, the Bluetooth headset takes pri-
ority. In that case you cannot use the
wire-bound headset.
Insert P
Key inserts a dialling pause (a P) when
entering a number
.
R Function
ISDN connections:
not relevant
Analogue fixed line:
Key inserts a recall
.
VoIP connections:
You can assign the
R function via the Web configurator
(Web page
Advanced Settings
):
– Connect two external callers with one
another (after a consultation call,
when call swapping)
