Siemens Gigaset DX600A ISDN Скачать руководство пользователя

Страница: 42 / 69

Sending SMS (text messages)

DL500A/DX600A-ISDN/DX800A / GRC EN / A31008-N3101-T101-1-8U43 / sms_BRD_neutral.fm / 27.10.10

rsion 4, 16.0

.2005

Sending SMS
(text messages)

Your base is delivered ready to send SMS
messages as soon as the phone is connected
to the fixed line/ISDN.

Prerequisites:

Calling Line Identification is enabled.

Your network provider supports the SMS
service (information on this is available
from your network provider).

To receive SMS messages, you must be
registered with your SMS service pro-
vider. This happens automatically when
you send the first SMS via the provider's
service centre.

Gigaset DX800A all in one/DX600A ISDN:

If you wish to receive SMS messages via sev-
eral connections, you must register each
connection separately with your service pro-
vider.

Define the connection via which you want to
send SMS (

Send via

) as follows:

Messaging

SMS

Settings

Service Centres

Writing/sending SMS

An SMS can be up to 612 characters. If there
are more than 160 characters, the SMS is
sent as a

linked

SMS (up to 4 SMS messages).

Messaging

SMS

New SMS

Select

and

press

§OK§

Write SMS.

§Options§

Press the display key.

Either:

Send

Select

and

press

§OK§

SMS

Select and press

§OK§

Select the number with the area
code (even if you are in that
area) from the directory or enter
it directly.

§Send§

Press the display key. The SMS is
sent.

Or:

Save

Select and press

§OK§

. The mes-

sage is saved in the draft list. You
can edit and send it later.

If you are interrupted by an external call
while writing an SMS, the text is automati-
cally saved in the draft message list.

Receiving an SMS

All received SMS messages are saved in the
incoming list. Linked SMS messages are dis-
played as

one

message. If this is too long or

is not transferred completely, it is split into
individual messages.

New SMS messages are indicated by the

icon in the display, the

message key

flashing and an advisory tone sounding.

You can open the incoming message list
with the message key

or via:

Messaging

SMS

Incoming

Reading SMS, managing lists

Messaging

SMS

Incoming/Draft

Select SMS.

§Read§

Press the display key.

§Options§

gives you access to functions includ-

ing the following:

Delete Entry

: Delete SMS.

Send

: Send/forward SMS.

Edit

: Edit and send SMS.

Reply

(Incoming message list):

Write a new SMS to the sender.

Содержание Gigaset DX600A ISDN






































































Результаты поиска

Содержание Gigaset DX600A ISDN

Отзывы:

Похожие инструкции для Gigaset DX600A ISDN

Бренды по названию

Популярные бренды

Siemens Gigaset DX600A ISDN, Руководство пользователя

Результаты поиска

Содержание Gigaset DX600A ISDN

Отзывы:

Похожие инструкции для Gigaset DX600A ISDN

Бренды по названию

Популярные бренды