78
Connecting/using other devices
Gigaset DL500A / GRC EN / A31008-N3103-T101-1-7619 / HS_and_other_Devices.fm / 31.08.10
V
e
rsion 4, 16.0
9
.2005
Cancelling/repeating current search
Cancel the search:
§Cancel§
Press the display key.
Repeat search if necessary:
In the known devices list:
§Options§
Press the display key.
Repeat Search
Select and press
§OK§
.
Displaying the name and address of
a device found
In the list of devices found:
s
Select entry.
§View§
Press the display key.
The device name and address are displayed.
Press
§OK§
to return to the list.
Adding the data device/mobile to the
known devices list
In the list of devices found:
q
Select the device to be regis-
tered.
§Options§
Press the display key.
Trust Device
Select and press
§OK§
.
If the list of known devices contains fewer
than five data devices and mobiles:
~
Enter a PIN of your choice or the
PIN of the Bluetooth device
to
be registered
and press
§OK§
.
Generally you can enter a PIN of your choice
for a data device/GSM mobile. You must also
enter this PIN in the data device/mobile
(handshake).
The device is saved in the list of known
devices.
If the list of known devices already contains
five data devices/mobiles, then the PIN
prompt is preceded by the message
Select
device to be replaced and trust again
. You
must select a device from the list to be
replaced by the new device before registra-
tion.
¤
If you press the display key
§No§
, the device
is not registered and the base returns to
the list of found devices.
¤
If you wish to replace a device in the list,
press the display key
§Yes§
. A list of the reg-
istered (known) data devices and mobiles
is displayed.
¤
Select the device to be replaced and
press the display key
§OK§
.
You will need to enter a PIN to register the
new device (see above).
If the new device fails to register, the list of
known devices will remain unchanged.
Adding a headset to the known
devices list
In the list of devices found:
q
Select headset.
§Options§
Press the display key.
Trust Device
Select and press
§OK§
.
If the headset transfers the PIN 0000 (the PIN
usually set on a headset), the headset is
directly added to the list of known devices. A
previously registered headset is automati-
cally de-registered.
If the headset transfers a PIN other than
0000, you are asked to enter the PIN on the
base.
~
Enter the PIN and press
§OK§
.
The device is saved in the list of known
devices.
Please note
u
The known devices list can only con-
tain one Bluetooth headset. If you
register a second headset, the first
one is deleted from the list.
u
A multi-service device can be regis-
tered as a headset and a data device.