Siemens Gigaset CE460 IP R Скачать руководство пользователя страница 52

Страница: 52 / 159

De-registering handsets

CE 450 IP R / IM-Ost english / A31008-M1817-R601_1-7619 / T-NetBox_SAG-registration.fm / 02.03.2007

ion 2,

.12.

2006

Registering other handsets

You can register other Gigaset handsets and handsets for other devices with GAP function-

ality as follows.

On the handset

Start to register the handset as described in its user guide.

On the base station

Press and

hold

(min. 1 sec.) the registration/paging key on the base station

(page 1).

De-registering handsets

You can de-register any registered C46 handset from any registered handset.

§INT§

Press the display key. All registered handsets are displayed.

Select the handset to be de-registered.

§Menu§

Press the display key.

De-register Handset

Select and press

§OK§

Enter the base station system PIN (default setting: 0000).

§OK§

Press the display key to confirm the prompt.

Press and

hold

(idle status).

The handset is de-registered immediately, even if it is not in idle status.

Changing a handset's internal number

A handset is automatically assigned the lowest available number on registration. In the list

of internal subscribers, the handsets are sorted according to their internal number.
You can change the internal number of all registered handsets (1–6). Numbers 1-6 can

only be assigned once each.

§INT§

Press the display key.

§Menu§

Press the display key.

Edit Handset Number

Select and press

§OK§

Select handset.

Enter the number (1–6).

§OK§

Press the display key to complete the operation.

You will hear the error tone if an internal number has been allocated twice.

Repeat the procedure with a free number.

Please note:

Other handsets may not support all base station functions.

Содержание Gigaset CE460 IP R
































































































































































Результаты поиска

Содержание Gigaset CE460 IP R

Отзывы:

Похожие инструкции для Gigaset CE460 IP R

Бренды по названию

Популярные бренды

Siemens Gigaset CE460 IP R, Руководство пользователя

Результаты поиска

Содержание Gigaset CE460 IP R

Отзывы:

Похожие инструкции для Gigaset CE460 IP R

Бренды по названию

Популярные бренды