2
Handset at a glance
Gigaset C355 / GBR / A31008-M1632-L161-1-7619 / overview.fm / 19.1.05
Base unit at a glance
You can use the keys on the base unit to
operate the built-in answering machine
and register handsets to the base.
1 Registration/paging key
Page handsets (press briefly, "Paging",
page 32).
Register handsets and DECT devices
(press and hold, page 31).
2 On/Off key: Activate/deactivate answering
machine.
Lights up: The answering machine is acti-
vated.
Flashes: There is at least one new message.
During message playback:
3 Delete the current message.
4 Go to the next (press once) or next-but-one
(press twice) message.
5 Playback/Stop Key:
Play back messages from the answering
machine, or cancel playback (press briefly).
Play back new and old messages one after
the other (press and hold).
6 Adjust volume during message:
ð
= quieter;
ñ
= louder.
While an incoming call is being indicated:
Adjust ringer volume.
7 Go to the start of the message (press once)
or to the previous message (press twice).
Please note:
u
The answering machine cannot be
operated from the base while it is being
operated from a handset or recording a
message.
u
If the On/Off key flashes although the
answering machine is switched off, it
means that there is still at least one
new message that has not been played
back yet.
Connecting the base station
¤
Please connect the mains unit
first
and
then
connect the phone jack as shown
below, placing the cords in the cord
recesses.
1 Underside of the base unit (partial view)
2 230 V mains unit
3 Phone jack with phone cord
Please note:
u
The mains units must be plugged in
at
all times
as the phone will not work
without a mains connection.
u
If you buy a replacement phone cord in
the shops make sure that the phone
jack has the correct type of wiring.
2
3
5
4
6
7
1
Correct phone jack wiring
1 unused
2 unused
3 a
4 b
5 unused
6 unused
1
3
2
1
1
1
3
2
1
4
5
6
