Siemens Gigaset C285 Скачать руководство пользователя страница 27

Страница: 27 / 48

Using several handsets

Gigaset C285 / CAN useng / A31008-M1973-R401-1-5819 / registr_sett.fm / 12.3.10

rsion 4, 16.0

.2005

Using several handsets

Registering and
de-registering handsets

You can register up to six handsets with your
base station.

A Gigaset C28H handset can be registered
with up to four base stations.

Registering the Gigaset C28H
handset

On the handset

§Menu§

Settings

Registration

Register HS

Select the base you want to reg-
ister your handset with and
press

§OK§

. Bases that have been

registered will be marked by

Enter your PIN and press

§OK§

(default setting: 0000,
see page 31)

The handset will be registered.

On the base station

Within 60 seconds press and

hold

the regis-

tration/page key

(for about 5 seconds)

on the base station (see page 3).

De-registering handsets

You can de-register any registered handset
from your Gigaset C285.

On a handset:

§Menu§

Settings

Registration

Unregister HS

Enter your PIN and press

§OK§

(default setting: 0000,
see page 31).

Select the handset you want to
de-register and press

§OK§

Press the display key to confirm
deletion.

Locating a handset ("paging")

You can locate your handset using the base
station.

Press the Registration/Paging key

the base station

briefly

All handsets will ring at the same time
("paging"), even if the ringers are
switched off.

On individual handsets you can press the
display key

§Quiet§

to mute the ring tone.

Ending paging

Briefly

press the Registration/Paging key

on the base station

or press any key

on the handset.

Changing the base station

If your handset is registered to more than
one base station, you can set it to a particular
base station or to the base station that has
the best reception (

Best Base

§Menu§

Settings

Registration

Select Base

Select one of the registered
base stations or

Best Base

and

press

§OK§

Making internal calls

Internal calls to other handsets registered
with the same base station or to the base
station are free.

Initiate internal call.

Select the handset or the base
station you want to call and
press

§OK§

Note:

The base station and supplied handsets are pre-
registered at the factory.

Содержание Gigaset C285

















































Результаты поиска

Содержание Gigaset C285

Отзывы:

Похожие инструкции для Gigaset C285

Бренды по названию

Популярные бренды

Siemens Gigaset C285, Руководство пользователя

Результаты поиска

Содержание Gigaset C285

Отзывы:

Похожие инструкции для Gigaset C285

Бренды по названию

Популярные бренды