25
Using the voice mailbox
Gigaset C285 / CAN useng / A31008-M1973-R401-1-5819 / answnetwork-mailbox.fm / 12.3.10
V
e
rsion 4, 16.0
9
.2005
¤
Listen to the playback until you hear two
beeps (=the end of message playback)
¤
Press the
G
key to activate the
answering machine.
u
If no (new or old) messages are stored on
the answering machine:
You will hear a beep. A status message is
played back and informs that no mes-
sages are stored on the answering
machine.
¤
Press the
G
key to activate the
answering machine.
You will hear a beep. The answering machine
is now activated on the corresponding line
and the activated announcement is played
back.
Deactivating the answering
machine
~
Dial the number of the line you
want to deactivate answering
machine for.
; ~
While listening to the
announcement, press the
;
key and enter the system PIN
(default setting: 0000,
see page 31).
9
Press
the
9
key.
You will hear a beep. Your answering
machine is now deactivated.
Using the voice mailbox
The voice mailbox is your telephone net-
work provider’s answering machine within
their telephone network. You cannot use the
voice mailbox unless you have
requested it
from your network provider.
Configuring the voice
mailbox for fast access
Entering the voice mailbox number
§Menu§
¢
Voice Mail
¢
Settings
¢
Line 1
/
Line 2
~
Enter the number of the voice
mailbox and press
§OK§
.
The setting for fast access applies to all
handsets.
If your network voice mail requires a pass-
word for access, it is possible to add a pass-
word by entering pauses (press the
k
key)
immediately after entering the mailbox
access number and before entering your
password.
Calling your voice mailbox
§Menu§
¢
Voice Mail
¢
Call VM
Line 1
/
Line 2
Select which mailbox you want
to call and press
§OK§
.
If you have new messages in your voice mail-
box:
§Call§
Press the display key to call the
voice mailbox.
d
Press the Handsfree key
d
, if
required. You hear the voice
mailbox announcement.
If you have new messages only for one voice
mailbox, the respective mailbox is immedi-
ately called.
If you have new messages for both voice
mailboxes:
When using a handset:
Line 1
/
Line 2
Select the line and press
§OK§
.
When using the base station:
Line 1
/
Line 2
Press the respective display key
to start the call.
For further operation steps, please refer to
the instructions provided by your mailbox
operator.