34
Using the directory and other lists
Gigaset C250 / englisch / A31008-C250-J101-1-7619 / Directories.fm / 20.06.2003
Opening lists with the Message key
You can use the Message key
f
to open the following lists:
1. Text message list (if several mailboxes are set up, they will all be listed),
2. Answering machine list (C 250 only),
3. Messages in the network mailbox (if your network provider supports this function
and the network mailbox is configured for fast access, page 72),
4. Calls list.
As soon as a
new entry
(a text message, a message on the built-in answering machine
(C 250 only) and/or a call) arrives in one or more of the lists, the
f
key
flashes
and you
hear an advisory tone. If you now press the flashing
f
key but you do not open any of
the lists but instead close the menu, the
f
key continues to flash.
If you press the flashing
f
key and open one of the lists, when you close the list the
key will stop flashing even if one of the other lists still contains
new
entries. If there is
at least
one
new entry, you can set the
f
key 'flashing' again, i.e. reactivate it. This will
let others, e.g. members of your family/your office colleagues, know that they have
received new messages.
The following lists are displayed when you press
f
:
◆
If only one list has new entries, the first new entry on that list is displayed; if the
entries are in a personal mailbox (page 51), then the appropriate list is displayed.
◆
If several lists have new entries, those lists are offered for your selection.
◆
If there are no new messages in any of the lists, then all the lists are offered for your
selection.
◆
If calls are stored in the network mailbox, you will see a message if the correct set-
ting has been made (refer to the network mailbox operating instructions).
Setting the Message key to 'flashing'/deactivating the Message key
Precondition:
There is still one new entry in one of the lists.
The key only flashes until it is pressed again and a list or list entry is opened.
Open the calls list.
[__________] [_____________________________________________________________]
Set MWI-LED
[_________]
OK
Select the menu item and confirm.
Long
press (back to idle status).
