40
Using several handsets
Gigaset C470/C475 / Grossbritannien / A31008-M1902-L101-1-7619 / registr_sett.fm / 6.8.07
Ve
rs
ion 4,
16
.09.
2005
Using several handsets
Registering handsets
You can register up to six handsets to your
base station.
Automatic registration of Gigaset
C47H to Gigaset C470/C475
Precondition: The handset must not
already be registered to a base station.
Registering the handset to the base sta-
tion occurs automatically.
¤
Place the handset in the base station
with its display facing forward.
Registration can take up to 5 minutes.
While this is happening,
Regstr.Procedure
appears in the display and the name of the
base station flashes. When the handset
has registered, its screen displays its inter-
nal number, e.g.
INT 2
for internal number
2. The handset is assigned the lowest
available internal number (1–6). If all
internal numbers 1–6 have been
assigned, number 6 is overwritten, pro-
vided the handset with the internal
number 6 is in idle status.
Manual registration of Gigaset C47H to
Gigaset C470/C475
You must activate manual registration of
the handset on both the handset and the
base station.
Once it has been registered, the handset
returns to idle status. The handset's inter-
nal number is shown in the display e.g.
INT 1
. If not, repeat the procedure.
On the handset
v
¢
Ð
¢
Handset
¢
Register H/Set
~
Enter the system PIN of the
base station (the default is
0000) and press
§OK§
.
Base
1
flashes in the display.
On the base station
Within 60 sec. press and
hold
the registra-
tion/paging key on the base station
(page 2) (approx. 3 sec.).
Registering other handsets
You can register other Gigaset handsets
and handsets for other devices with GAP
functionality as follows.
On the handset
¤
Start to register the handset as
described in its user guide.
On the base station
Press and
hold
the registration/paging key
on the base station (page 2) (approx. 3
sec.).
Deregistering handsets
You can deregister any other registered
handset from any registered Gigaset C47H
handset.
u
Open list of internal parties.
The handset you are currently
using is indicated by
<
.
s
Select the internal party you
wish to deregister.
§Options§
Open menu.
De-reg. H/Set No.
Select and press
§OK§
.
~
Enter the current system PIN
and press
§OK§
.
§Yes§
Press the display key.
Please note:
– Automatic registration is not possible when
the base station to which you wish to regis-
ter the handset is being used to make a call.
– Each key press interrupts the automatic
registration.
– If automatic registration does not work,
you will have to register the handset manu-
ally.
– You can change the name of the handset
