Siemens Gigaset A580 IP Скачать руководство пользователя страница 153

Страница: 153 / 212

152

Web configurator – Setting the phone using a PC

Gigaset A580 IP / GBR / A31008-xxxx-xxxx-x-xxxx / web_server.fm / 24.03.2010

rsion 8, 03.0

.2008

Changing internal handset numbers and names

Each handset is

automatically

assigned an internal number (1 to 6) and an internal

name ("

INT 1

", "

INT 2

" etc.) when it registers with the base station (

Page 83

The internal numbers and names of all registered handsets can be changed.

Open the following Web page:

Settings

Handsets

The names and internal numbers of all registered handsets are displayed in the

Registered Handsets

area.

Select the handset whose number/name you want to change.

Changing numbers:

Select the internal number that you want to assign to the

handset in the

No.

column of the handset. If a handset with this internal number

already exists, you will also have to change the number allocation for this hand-
set. The internal numbers 1-6 can only be assigned once each.

Changing names:

If necessary, change the name of the handset in the

Name

column. The name may contain up to 10 characters.

If necessary, repeat the process for other handsets.

Select

Set

to save the settings.

The changes are saved in the internal lists of all registered handsets. Handsets are
sorted by their internal numbers in the internal list. The order of the handsets in the
list can therefore be changed.

Please note

For information on how to change internal names and numbers,

Page 86

Please note

If an internal number has been entered twice, a message will appear. The internal
numbers are not changed.

Содержание Gigaset A580 IP





















































































































































































































Результаты поиска

Содержание Gigaset A580 IP

Отзывы:

Похожие инструкции для Gigaset A580 IP

Бренды по названию

Популярные бренды

Siemens Gigaset A580 IP, Руководство пользователя

Результаты поиска

Содержание Gigaset A580 IP

Отзывы:

Похожие инструкции для Gigaset A580 IP

Бренды по названию

Популярные бренды