124
Web configurator – Setting the phone using a PC
Gigaset A580 IP / GBR / A31008-xxxx-xxxx-x-xxxx / web_server.fm / 24.03.2010
V
e
rsion 8, 03.0
9
.2008
Area: Auto Configuration
The entire configuration process or a large part of the configuration for a VoIP con-
nection is automated for many VoIP providers. You can download the necessary
VoIP access data to your phone from the Internet.
You have the following options:
u
Fully automated configuration
Preconditions:
– You have received an
auto configuration code
from your VoIP provider.
– The general access data for your VoIP provider is available for downloading.
You can download all the data required for VoIP access from the Internet:
¤
Enter the auto configuration code you received from your VoIP provider in
the
Auto Configuration
area in the
Auto Configuration Code
field (maxi-
mum 32 characters).
¤
Select the
Start Auto Configuration
button.
The telephone establishes a connection to the Internet and downloads all data
required for the VoIP connection, i.e. the general provider information and your
personal provider data (account data) are saved to your base station.
If you have already entered details on the Web page, this is deleted as soon as
Start Auto Configuration
is selected. The fields in the
Personal Provider Data
and
General Provider Data
areas and the server addresses in the
Network
area
are overwritten by the downloaded data.
Generally, you should not have to enter any additional data on this Web page.
When the download is complete, the
list will be displayed.
¤
Activate the connection as described on
.
You can then be reached on the corresponding VoIP phone number.
Please note
If the message
Download of settings not possible! File is corrupt!
appears, no
data will be loaded onto the phone. Possible causes of this are:
u
The incorrect code has been entered (e.g. upper/lower case rules have not
been followed). If necessary, enter the code again.
u
The file that has been downloaded is invalid. Please consult your VoIP provider.
