Siemens Gigaset 108 Скачать руководство пользователя страница 57

Страница: 57 / 142

Configuring the Advanced Settings

Gigaset WLAN Repeater 108 / englisch / A31008-M1030-B101-3x-7619 / advanced_config.fm / 06.11.2008

plat

e 20

05_0

5_02

Setting wireless security

To protect your wireless local network against eavesdropping and unauthorised access
to your data, you should set the data encryption.

Repeater and Ethernet adapter Operating Mode

The encryption selection that is available will depend on your access point.

Check what type of encryption and which keys are set at the access point, and make
the corresponding settings in the Gigaset WLAN Repeater 108.

Operating Mode Access point

The encryption selection depends on which methods are supported by all your wireless
network components.

Set the corresponding encryption of your data on the Gigaset WLAN Repeater 108
and then on the other components of your wireless network.

You can use the following security mechanisms:

WPA2-PSK and WPA2-PSK / WPA-PSK (see page 58)

WAP2 and WPA2 / WPA with authentication server (only in Access point mode,
see page 59)

WEP encryption (Wired Equivalent Privacy), (see page 60)

We recommend using WPA2-PSK if it is supported by all components in your wireless
network.

Note:

If you have selected several access points in repeater mode (see page 27 and
see page 65), only WEP is available for encryption.

Содержание Gigaset 108















































































































































Результаты поиска

Содержание Gigaset 108

Отзывы:

Siemens Gigaset 108, Руководство пользователя, Страница: 57 / 142

Результаты поиска

Содержание Gigaset 108

Отзывы: