Siemens GCP5000 Скачать руководство пользователя страница 166

Страница: 166 / 478

DISPLAY MODULE AND OFFICE CONFIGURATION EDITOR

_________________________________________________________________________________________________________

3-102

SIG-00-22-02 JUNE 2022 (Revised September 2022)

Version: B.1

Setting

Possible Values

Default Value

Description

Data/DTMF Channel 1 – 8

Specifies the channel of the radio
that will be used to send and
receive data packets and DTMF
tones.

Voice Channel

1 - 8

Specifies the channel of the radio
that will be used to transmit
digitized speech.

For more details regarding the VHFC see SIG-00-03-002, VHF Communicator, A80276 User
Guide.

3.5.2.7.4

WAG

When a WAG is selected the Node number is available, range 1-99, this is the Subnode on the
Echelon

of the WAG. By default, this is 1.

The user may give the WAG a name, which the SEAR will use when logging entries related to
this module.

Figure 3-150 Echelon

Modules: WAG

Содержание GCP5000































































































































































































































































































































































































































































































Результаты поиска

Содержание GCP5000

Отзывы:

Siemens GCP5000, Инструкция по эксплуатации и монтажу, Страница: 166 / 478

Результаты поиска

Содержание GCP5000

Отзывы: