manualshive.com logo in svg

Siemens FUG1010 IP65 NEMA 4X, Руководство по эксплуатации, Страница: 141 / 271

Поделиться
Скачать
Siemens FUG1010 IP65 NEMA 4X Скачать руководство пользователя страница 141

Service and maintenance 

 

9.3 Return procedures 

 

FUG1010 IP65 NEMA 4X 

140

 

Operating Instructions, 01/2013, A5E02951519-AC 

Additional Support   

Please contact your local Siemens representative and offices if you have additional 

questions about the device. 
Find your local contact partner at: http://www.automation.siemens.com/partner  

See also 

Local contact person (

http://www.automation.siemens.com/partner

) 

9.3

 

Return procedures 

Enclose the delivery note, the cover note for return delivery together with the declaration of 

decontamination form on the outside of the package in a well-fastened clear document 

pouch.    

Required forms 

●

 

Delivery Note 

●

 

Cover Note for Return Delivery with the following information 
Return delivery form (

http://support.automation.siemens.com/WW/view/en/16604370

) 

–

 

product (ordering number) 

–

 

number of devices or spare parts returned 

–

 

reason for the return 

●

 

Declaration of Decontamination  
Decontamination declaration 

(

http://pia.khe.siemens.com/efiles/feldg/files/Service/declaration_of_decontamination_en.

pdf

) 

With this declaration you certify 

that the returned products/spare parts have been 

carefully cleaned and are free from any residues. 
If the device has been operated together with toxic, caustic, flammable or water-

damaging products, clean the device before return by rinsing or neutralizing. Ensure that 

all cavities are free from dangerous substances. Then, double-check the device to ensure 

the cleaning is completed. 
We shall not service a device or spare part unless the declaration of decontamination 

confirms proper decontamination of the device or spare part. Shipments without a 

declaration of decontamination shall be cleaned professionally at your expense before 

further proceeding.  

You can find the forms on the Internet and on the CD delivered with the device. 

Содержание FUG1010 IP65 NEMA 4X
















































































































































































































































































Отзывы:

Нет отзывов