manualshive.com logo in svg

Siemens FT2010, Руководство по эксплуатации, Страница: 37 / 40

Поделиться
Скачать
Siemens FT2010 Скачать руководство пользователя страница 37

Glossary

37 | 40

Building Technologies

009310_l_en_--

Fire Safety

2018-08-29

PMI

The arrangement of operating and display elements on a fire control panel or on a fire terminal. Includes the

LEDs, buttons, the display, and the operation options such as the key switch, fire brigade control and

display (FBA), and the EVAC NL Person Machine Interface.

Pre-alarm

Stage before an alarm for information early on, should an event occur.

Remote transmission

Remote transmission.

Section

Level in detection tree of the fire detection system. The section is assigned to the area. It is used for

combining zones.

Site

Depiction of fire detection installation: The top level in the figure showing the installed system. Combines

hardware tree, detection tree, and control tree.

Technical message

Events (e.g., from third-party systems) evaluated via sensors or contacts which are forwarded to the fire

control panel.

Visibility

Defines which part of a site is visible and can be operated on a station.

Содержание FT2010









































Отзывы:

Нет отзывов