Siemens FST020 Скачать руководство пользователя страница 15

Страница: 15 / 194

FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA

Introduction

1.1

Function Manual scope

Note
This Function Manual applies to the SITRANS FST020 only.

The FST020 transmitter can be connected to sensor types FSS200 and FSS300.

1.2

Purpose of this documentation

This manual contains a description of all device parameters and is aimed at persons

configuring the device.
The default settings and the setting ranges are listed in tables for each parameter.

Furthermore, the relation, if any, between parameters is described.
As of chapter 3, Setup (Page 19), the chapter and subchapter numbers equal the parameter

numbers in the HMI structure.
For parameters with access level other than User (for example Read only or Expert), the

access level is stated in parenthesis after the parameter name.

1.3

Quick start wizards

The device offers a set of wizards which will guide you through configuration of parameters

essential for your application. The quick commissioning wizards are described in the

Commissioning chapter of the device Operating Instructions.

1.4

Support

For product support, or to contact a Siemens representative, see Technical support

(Page 187).

Содержание FST020



































































































































































































Результаты поиска

Содержание FST020

Отзывы:

Siemens FST020, Руководство по эксплуатации функций, Страница: 15 / 194

Результаты поиска

Содержание FST020

Отзывы: