Siemens FDUL221 Скачать руководство пользователя страница 37

Страница: 37 / 76

Structure and function

Function

Building Technologies

008250_i_en_--

Fire Safety

2013-08-15

5.4

Function

The functions of the FDUL221 line tester are divided into two independent modes.

Topology

This mode shows all information relating to the connected detector line [ 38].

Configuration

This mode shows all information and settings for the FDUL221 line tester.

5.4.1

Power supply

The FDUL221 line tester can be operated via a power unit or with batteries.

Mains operation

The batteries may be inserted during mains operation.

For mains operation, connect the FDUL221-B power unit to the

socket for

external power supply.

The mains operation is shown as a symbol in the display when the FDUL221 is

switched on.

Mains operation

Battery operation

For battery operation, insert two batteries into the battery compartment. Ensure

they are inserted correctly. [ 67]

In the case of battery operation, the charge state of the partially discharged

batteries is shown.

Charge state of the partially discharged batteries

5.4.2

User language

The FDUL221 line tester can be operated with different user languages. To change

the user language, the desired language must be selected during a firmware

update. You will find more information in chapter 'Firmware update [ 69]'.

Содержание FDUL221













































































Результаты поиска

Содержание FDUL221

Отзывы:

Siemens FDUL221, Техническое руководство, Страница: 37 / 76

Результаты поиска

Содержание FDUL221

Отзывы: