Siemens FCT010/DSL Скачать руководство пользователя страница 85

Страница: 85 / 180

Service and maintenance

9.1

Basic safety notes

Note

The device is maintenance-free.

The device is maintenance-free. However, a periodic inspection according to pertinent directives
and regulations must be carried out.

An inspection can include, for example, check of:

• Ambient conditions

• Seal integrity of the process connections, cable entries, and cover

• Reliability of power supply, lightning protection, and grounds

WARNING

Impermissible repair and maintenance of the device
• Repair and maintenance must be carried out by Siemens authorized personnel only.

WARNING

Impermissible repair of explosion protected devices

Risk of explosion in hazardous areas
• Repair must be carried out by Siemens authorized personnel only.

WARNING

Dust layers above 5 mm

Risk of explosion in hazardous areas.

Device may overheat due to dust build up.
• Remove dust layers in excess of 5 mm.

SITRANS MASS 2100 & FC300 (FCT010/DSL)
Operating Instructions, 06/2020, A5E39788682-AB

Содержание FCT010/DSL





















































































































































































Результаты поиска

Содержание FCT010/DSL

Отзывы:

Siemens FCT010/DSL, Руководство по эксплуатации, Страница: 85 / 180

Результаты поиска

Содержание FCT010/DSL

Отзывы: